System Features
- IMO, USCG, Transport Canada, ABS, DNV, EC MED (Marine Equipment Directive) approved
- Oil-in-water contents consistently below 5 ppm
- Automatic heavy oil separation and removal
- PLC driven system and shipboard alarm interface
- Variable processing speed to set flow rates
- Designed to dampen surging and effect of ship's motion
- Continuous monitoring of hydrocarbons in effluent
- Temperature control for extreme environments
- Sludge / Heavy oil retention tank
PetroLiminator Technical Specifications & Installation Requirements
| USCG / IMO: |
PL630M: MEPC.107(49)
PL400M: MEPC.107(49)
PL200M: MEPC.107(49) |
| Operation: |
Continuous, 24 hours per day, 7 days per week |
| Construction: |
Marine Epoxy-Coated Carbon Steel w/ Stainless Steel Piping
Complete System in Stainless Steel Available on Request |
| Influent: |
Oily Bilge Water |
| Effluent: |
Water (overboard)
Trace amounts of Carbon Dioxide (to atmosphere)
Phase Separated Oil (to waste oil or reclamation tank) |
| Power Requirements: |
380 VAC 50 Hz three-phase or
460 VAC 60 Hz three-phase or
600 VAC 60 Hz three-phase
Other configurations available upon request |
| Influent Pump: |
Positive displacement (progressive cavity or peristaltic)
Maximum suction lift: 9m (27’)
Specific gravity up to 1.1 |
| Effluent Pump: |
Centrifugal pump Discharge head typically 2 BAR (65') or sized for application |
|
|
